|
|---|
Cages, Bars & Racks |
 | | Yamaha Rhino Bolt on Cage fit 06 thru 09 and replaces stock Rhino cage, no drilling necessary. Made from 1 3/4 .095 steel tubing. We fixture every tube on our rollcages to guarantee a quality fit at every weld joint. Available in factory Powder Coat colors. When ordering specify model year. |
|
 | | This is our 06 thru 09 Yamaha Rhino Basic Replacement Cage modified to include these deluxe features: 3 grab handles, removable cooler rack with cooler, 1 whip tab with internal pull wire to pull your electrical wires through the tube, X braced roof and the dash bar. Available in factory Powder Coat colors. Specify model year when ordering. |
|
 | | For those that do not want to replace the stock cage, but would like the option to add a rear seat. We have developed our Yamaha Rhino Bolt-on Half Cage.Our Rear cage is constructed out of 1 3/4 x .095 tubing and matches the lines of the factory unit. Our Half Cage bolts into the rear cargo tie down points with a 3/16" thick support pad distributing load to the bottom of the bed. Our clamshell front mount design, clamps onto the existing rollcage and is easily removable for service to the engine. Available in factory Powder Coat colors for an additional charge.
|
|
 | | We have had a number of people ask us to build the very popular Ranger Cantilever style cage for the Rhino. By popular demand, we have responded.
This cage provides excellent protection while still alowing the bed to tilt. Easy boly on, includes all hardware and whip tab. Our Gen 3 cage comes with internal wire routing and is guaranteed to fit. Available in factory Powder Coat colors for an additional charge.
|
|
 | | Our Gen 2 Half Cage is even easier to install. No clam shells are needed. The cage is full width and has cross bracing in the top for extra strength. Our Rear cage is constructed out of 1 3/4 x .095 tubing and matches the lines of the factory unit. Our Half Cage bolts into the rear cargo tie down points with a 3/16" thick support pad distributing load to the bottom of the bed. Our front mounting design replaces the factory cage cross member and is easily removable for service to the engine. Available in factory Powder Coat colors. |
|
 | | Bolts onto RNO150 Half Cage, includes cooler and hold down strap. Available in factory Powder Coat colors. |
|
| | Bolts onto Rhino Gen 2 Half Cage, includes cooler and hold down strap. Available in factory Powder Coat colors. Also fits the RNO100 and RNO101. |
|
 | | Bolts onto Rhino Gen 2 Cage, includes coolers and hold down straps. Available in factory Powder Coat colors. Also fits the RNO100 and RNO101. |
|
.jpg) | | We have had a number of requests for cargo racks and spare tire carriers. After several prototypes and revisions we are proud to introduce our new receiver mount cargo rack.
We designed our new rack to mount easily, hold securely and not rattle and shake. Our design uses the factory receiver hitch, and two existing frame holes to mount our upper support. This design triangulates the rack, provides stability and still allows it to install and remove easily.
Our new rack is also very strong. We use 2 x .120 tubing for the backbone, it’s capable of supporting two spare tires, four fuel jugs, or two loaded coolers on the roughest of trails. Take a look from the side and notice that we retained the great approach angle of the ranger while allowing the upper tube to double as a seat belt mount.
If you’re looking for a way to bring your gear with you without filling your bed, you now have an option. Available in factory powder coat colors for an additional charge. Includes a cooler and hold down strap.
|
|
_sm.jpg) | | Our front seat harness bar gives you a place to attach your shoulder harneses, when adding the 4 point belt system to the fornt seats. Comes in the usual powder coat colors or bare steel. |
|
 | | Our front seat harness bar gives you a place to attach your shoulder harneses, when adding the 4 point belt system to the fornt seats. Comes in factory powder coat colors or bare steel. |
|
 | | 06 bare steel and powder coated Leg Bars are on sale while supplies last. Includes Driver and passenger leg bars. Attaches to existing bolts location. (Longer grade 8 bolts included). Available in factory Powder Coat colors for an additional 19.99 |
|
| | Includes Driver and passenger leg bars. Attaches to existing bolts location. (Longer grade 8 bolts included). Available in factory Powder Coat colors for an additional 19.99 |
|
 | | This light bar is designed to be used with the stock Rhino cage. It bolts into place and has 4 light tabs. Alailable in factory Powder Coat colors. |
|
 | | For full cages only. Made of 1 1/2", 1 1/4", 7/8" x .095" tubing. Mounted with 3 bolt tabs for two positions: Up for operation and down for loading in your trailer. Has four light mounting tabs. Designed to hold 6.5" lights. Available in factory Powder Coat colors. |
|